How to install Acoustic Panels Art sound absorption panels
Sound absorption panels Installation instructions and howto
APA Support
Last Update 4 years ago
Sound absorption panels with personalized image imprint is a very effective sound absorption panel with NRC 0.91 (91% sound absorption)!
This is incredible, I know! And it is also very easy to install.
We included 4 T-pins for your convenience:
Simply push the pin though the Fibrous matter of the panel about half the thickness of the panel:
at an angle of approximately 45% from top down. Like this:
And push it into the drywall. If it is too hard you can use a light hummer to lightly hummer the pin in to the wall. You can use just one, two or more pins, depending on the panel orientation or positioning of the panel on a wall.
DO NOT push the pin all the way so it squeezes the panel.
Just allow enough of the pin to come out, so it will have a good hold in the drywall. About half an inch should be sufficient.
And this is what it would look like:
THANK YOU and HAPPY RECORDING!